Was $8,211.00 CAD$6,649.00 CAD
Flight Clave23+ Class S steam sterilizer: a 23L tabletop autoclave with four trays and air-assisted drying from an integrated compressor. Sold, installed and serviced across BC, Alberta and Saskatchewan by Alpha Scientific.
Questions or to order: 1-888-818-4847 (toll-free) · 604-690-3389
Flight Clave23+ (Flight Clave 23) 23L Class S tabletop autoclave. SKU A9005-23+. It has a 9.72″ × 17.7″ chamber with 4 trays, pressure-pulsing steam injection, a built-in compressor for air-assisted closed-door drying, a printer and a USB data logger. Alpha Scientific Repair Services Ltd, an authorized Flight Clave dealer, sells, installs and services it across British Columbia, Alberta and Saskatchewan.
Was $8,211.00 CAD $6,649.00 CAD
Order or get a quote: 1-888-818-4847 (toll-free) · 604-690-3389 (Lower Mainland) · Mon to Fri, 9 AM to 5 PM
The Flight Clave23+ is a 23-litre tabletop steam sterilizer for busier dental, medical, veterinary, podiatry, chiropody, tattoo and beauty offices. Flight Dental Systems is a Canadian-owned manufacturer based in Brampton, Ontario. Many listings call it the "Flight Clave 23", "Clave23" or "Clave 23+"; the current version is the Clave23+.
The Clave23+ is a Class S sterilizer. An independent steam generator injects pulses of pressurized steam (positive pressure displacement) so air is removed more completely before sterilization starts. Flight says this reduces maintenance and speeds up the process.
Flight compares it to a Statim: a much larger chamber with similar sterilization times.
The 23L chamber fits 4 trays, or cassettes holding up to 25 instruments per slot, so you can process more in each load.
Sterilization holds at 134 °C are 4 minutes unwrapped and 10 minutes wrapped or for rubber and textiles. A built-in compressor then dries the load with the door closed in about 30 minutes.
Each cycle is saved to the USB key as a .txt file that opens on any PC and can be printed. Automatic records support inspection readiness for College and Health Department audits. They are not a compliance guarantee, so please check your own college's or health authority's requirements.
Powder-coated solid steel housing, a 300-series stainless steel chamber, quality parts made in Europe and removable panels. The water pump, circuit board, steam generator, heat exchanger and solenoid valves are separate components, and Flight stress tests every unit.
| Model | Flight Clave23+, SKU A9005-23+ |
|---|---|
| Type | Class S tabletop steam sterilizer (autoclave) |
| Chamber | 23 L · 9.72″ × 17.7″ (247 × 450 mm), 304 stainless steel |
| Trays | 4, each 15″ × 7.6″ × 0.7″ (D × W × H); or 25 instruments per slot with cassettes |
| Programs | Solid/Unwrapped, Wrapped, Liquid, Textile, Prions |
| Solid/Unwrapped | 4 min at 134 °C, or 20 min at 121 °C |
| Wrapped | 10 min at 134 °C, or 30 min at 121 °C |
| Liquid/Textile/Rubbers | 10 min at 134 °C, or 30 min at 121 °C; about 65 min total including drying |
| Operating pressure | 210 kPa at 134 °C · 110 kPa at 121 °C |
| Drying | Air-assisted closed-door drying with built-in compressor, about 30 min |
| Water | Distilled water reservoir with level sensor; 5 to 6 cycles per fill |
| Records | Printer and USB data logger (USB key included); .txt cycle files |
| Voltage | 110 V, 50/60 Hz |
| Overall dimensions (W × H × D) | 18.9″ × 18.3″ × 27.6″ |
| Minimum table space (W × H × D) | 20.75″ × 21.63″ × 25″ |
| Weight | 121 lb (55 kg) |
| Warranty | 2 years on parts |
Hold times are the sterilization phase only. Flight lists totals of roughly 45 to 55 minutes for unwrapped and wrapped loads and 65 minutes for liquid/textile/rubbers, including the 30-minute dry. Ask us what to expect for your loads. Specifications are from Flight Dental Systems documentation and may change; see the downloads below.
Flight's recommended maintenance schedule:
Our technicians can handle the scheduled work for you. See autoclave maintenance & calibration.
When you buy a Clave23+ from Alpha Scientific, factory-trained technicians support it for its whole working life. We are an authorized Flight Clave dealer and an authorized Tuttnauer dealer. Founded in 2002, we provide mobile on-site service across British Columbia, Alberta and Saskatchewan.
Need repair or PM on a sterilizer you already own? See autoclave repair in BC, our services and service rates & guarantee.
See the full Flight Clave autoclave range, or jump to a model:
Comparing brands? Browse all table top autoclaves, including Tuttnauer, or see all autoclaves.
Yes. You'll see this 23L model listed as Flight Clave 23, Clave23 or Clave 23+. Alpha Scientific supplies the current Flight Clave23+ (SKU A9005-23+).
It is Class S. It removes air with pressure-pulsing steam (positive pressure displacement). Flight's Class B pre/post-vacuum model with a 23L chamber is the ClaveB; call us to compare the two.
Both use the same Class S technology. The Clave16+ has a 9″ × 14.2″ chamber with 3 trays; the Clave23+ has a 9.72″ × 17.7″ chamber with 4 longer trays and is 27.6″ deep, so check your counter depth (Flight recommends at least 25″ of table depth).
Sterilization holds at 134 °C are 4 minutes unwrapped and 10 minutes wrapped or for rubber and textiles, followed by about 30 minutes of closed-door drying. Total time depends on the program and load.
Yes. It has a printer and a USB data logger (USB key included). These records support inspection readiness but are not a compliance guarantee.
110 V, 50/60 Hz. Please confirm your outlet and circuit with us before delivery.
Yes. We provide delivery, set-up, staff training, preventative maintenance and on-site repair with factory-trained technicians across British Columbia, Alberta and Saskatchewan, including Calgary and Edmonton.
The Clave23+ is $6,649.00 CAD (was $8,211.00 CAD). Call 1-888-818-4847 or 604-690-3389, Monday to Friday, 9 AM to 5 PM.
Want to talk about our autoclave or medical equipment or services? Have a question about your existing autoclave or medical equipment?
Fill out the form below and let our experts help you today!
